Name: Alexapure Pro Certified Replacement Filter
SKU: WA-AP-PROFLTR
Price: 129.55 USD
Availability: InStock

Cleaner Water Takes a Clean Filter. Don't Forget to Change Yours!

Keep a clean filter in your Alexapure Pro Water Filtration System to reduce 206 contaminants commonly found in drinking water.

If you notice a change in the flow rate of your Alexapure Pro, then it’s time to replace your filter.

There are 267 contaminants in American drinking water, and the majority of filters only catch a few of them. That’s because most are not designed to reduce bacteria, fluoride, lead, pesticides, pharmaceuticals, or viruses.

The Alexapure Pro Genuine Replacement Filter reduces 206 contaminants commonly found in drinking water:

Bacteria (> 99.9999%)
Chlorine (> 99.9%)
Fluoride (> 97%)
Pesticides (> 95%)
Pharmaceuticals (> 95%)
Viruses (> 99.99%)
Heavy metals
Lead

The Alexapure Pro Genuine Replacement Filter is an innovative filter with a catalytic gravity barrier that blocks contaminants other filters let through.

The Only Filter Made Specifically for the Alexapure Pro

The Alexapure Pro Genuine Replacement Filter is the only filter created specifically for the Alexapure Pro. It's made in the USA, with quality that's second to none. Each filter:

Is powered by proprietary gravity-block, ionic-adsorption technology.
Has a silver-infused outer carbon block.
Requires no priming. It's ready to use right out of the box!
Made in the USA.

30-Day, No-Questions-Asked Guarantee

We extend a 30-day, no-questions-asked return policy on all unopened products. After 30 days—or for opened products—we will review your return request on a case-by-case basis. Our goal is to ensure you have a pleasant experience from start to finish!

Components

One full-size Alexapure Pro Genuine Replacement Filter
Installation hardware

Chlorine reduction claims are not performance tested beyond 200 gallons. Additional performance claims are based on independent laboratory and manufacturer’s internal test data. Actual performance depends on influent water quality, flow rates, system design, and application. Results may vary.

This system has been tested for reduction of substances per NSF/ANSI 53 standards. Minimum substance reductions are listed on provided test data sheets for up to 200 gallons.

System and installation must comply with state and local laws. Do not use with microbiologically unsafe or unknown quality water without adequate testing and/or disinfection before or after the system. Manufactured from NSF/ANSI standard 61 and California Prop 65 compliant certified coconut shell carbon and raw materials.

For best results, store replacement filters above 35°F. Keep the filter moist and avoid drying at all times for maximum filtration capacity.

Performance claims depend on complete system use and proper operation per manufacturer's specifications.

Warranty and limited liability: The manufacturer disclaims all warranties except for product performance as described. Obligations limited to refund or replacement of defective products. Use constitutes acceptance of limited liability terms.

Please note: Returns of opened filters within 30-day window may incur a $75 restocking fee.

Alexapure Pro Genuine Replacement Filter Directions

Your Alexapure Pro Genuine Replacement Filter is biologically sterile and packed in a mix of alcohol and water.

Remove lid from the top compartment of the Alexapure Pro Water Filtration System.
Place the top compartment to the side and stabilize the old filter.
While stabilizing the old filter, unscrew the wing nut from beneath it.
Slide out and dispose of the old filter.
Unbox your new Alexapure Pro Genuine Replacement Filter.
Remove the plastic wing nut from the new filter, ensuring the washer remains in place.
Thread the stem of the filter through one of the four holes in the floor of the upper compartment, holding the filter straight.
Fix the new filter in place by securing the plastic wing nut.
Your Alexapure Pro Genuine Replacement Filter requires no priming and is ready to use right out of the box!